Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

15Connections (with S-Video cable)Connections and preparations for a TV with S-Video socket.The conventional video sockets of DVD Recorder’s output (input) a combination of the luminance signal (Y) and colour signal (C) which arerecorded on the disc. The S (Separate)-Video socket allows separate transmission of signals in order to obtain clearer pictures.The connection with S-Video Cable can also be used for playback of any disc. The “S” in the “S-Video socket” stands for “SEPARATED Y/C”not for “S-VHS”.Recording from Set Top Boxes (STB) or other Satellite Receivers (SAT)ª Recording video signal by “Sky personal Planner” and “External Link 1” FunctionsTo record programmes from satellite receiver using “Sky Personal Planner” function together with the “ExternalLink1” function of this DVD Recorder:≥Make connections as shown.≥Change the settings in the SETUP menu as follows (page 63).- “AV2 Input” set to “Video”- “AV2 Connection” set to “Ext Link 1”- “AV1 Output” set to “RGB”, “S-Video” or “Video” to suit the AV terminal of your TV.≥Set up Personal Planner programmes as required.≥Press [EXT LINK] (43) on the DVD Recorder.“External Link1” function can only be used with the “Sky Personal Planner” function for timer recording of videosignal from the “VCR Scart” terminal of the Sky Digital Set Top Box.ª Recording RGB SignalsMost Satellite Receivers are capable of outputting RGB signals for viewing on television through a Scart terminal (called “TV Scart” on a SkyDigital STB).In the case of a Sky Digital STB, recording of RGB signals from the “TV Scart” terminals is possible, but the “Personal Planner” function fortimer recording cannot be used in conjunction with the “External Link1” function of this DVD Recorder.To record programmes by RGB signals:≥Make connections as shown.≥Set your Sky Digital STB to output “RGB” signals.≥Change the settings in the SETUP menu as follows (page 63).- “AV2 Input” set to “RGB (PAL only)”- “AV2 Connection” set to “NORMAL”- “AV1 Output” set to “RGB”, “S-Video” or “Video” to suit the AV terminal of your TV.≥Set up Personal Planner programmes as required.≥Follow the steps for setting up timer programming.After setting Personal Planner programmes as required, Sky Digital STB must be left on (not set tostandby) to ensure continuous output of RGB signals.It is not possible to use the “External Link 1” function of the DVD Recorder for timer recording of RGBsignals from the Sky Digital STB.RF INRF OUTOPTICAL AV1 (TV)AV2 (DECODER/EXT)DIGITAL AUDIO OUT(PCM/BIT STREAM)R - AUDIO - L VIDEO S-VIDEOR - AUDIO - L VIDEO S-VIDEOAV4 INOUTAerial(not supplied)Aerial InputsocketAudio/videoInput socketTV with S-VideoInput socket(not supplied)To AC MainssocketS-Video InputsocketAudio/Video cables(supplied)RF lead(supplied)S-Video cable(not supplied)RF OutputsocketRF Input socketS-VideoOutput socketAudio/VideoOutput socketAC Mains lead (supplied)AC InputsocketDVD-RecorderSTB/SATAVTVAV2AV1VCR ScartDVD-RecorderSTB/SATAVTVAV2AV1TV Scart