Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

76Troubleshooting guide (continued)DisplaysPlayThe display is dim. ≥Go to Display in the SETUP menus and change the display’s brightness with “FL Display”.(page 62)“0:00” is flashing on the unit’sdisplay.≥The clock is not set.Go to Settings in the SETUP menus and set the clock with “Clock”. (page 66)“NO READ” appears on the unit’sdisplay after using a lens cleaner.≥Take the cleaner out of the unit.Play fails to start even when [1](26) is pressed.Play starts but then stopsimmediately.“NO READ”, “UNSUPPORT”, “NODISC” or “NO PLAY” appears onthe unit’s display.≥Insert the disc correctly with the label facing up. (page 20)≥This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Audio, DVD-Video, Video CD,CD and MP3 disc. (page 10)≥The disc is dirty. Clean it. (page 70)≥The disc may be badly scratched. (page 70)≥You inserted a blank DVD-RAM or DVD-R.No response when buttonspressed.≥If “ ” appears on the televisionthe operation is prohibited by the unit or disc.≥If the unit is not operating at all, press [ , TIMER] (14) to switch the unit to standby, then press[ , TIMER] (14) again to turn the unit on. The unit may not be operating correctly due tolightning, static electricity, or some other external factor.≥The Child Lock function is activated. (page 56)A title or chapter doesn’t playwhen it is selected.≥Some titles and chapters on DVD-Video are not played when you have changed the ratingslevel. (page 64)Picture distorted during search. ≥Some distortion is normal.Alternative soundtrack andsubtitles cannot be selected.≥The languages are not recorded on the disc.≥You may have to use the disc’s own menus to select languages.Soundtrack/subtitle language isdifferent from the one selectedwith the SETUP menus.≥The language is not recorded on the disc. (page 61)No subtitles. ≥Subtitles are not recorded on the disc.≥Turn the subtitles on. (page 47)Angle cannot be changed. ≥This function depends on software availability. Angles can only be changed during scenes wheredifferent angles are recorded (“ ” appears on the display).You have forgotten your ratingspassword.≥Return the unit's settings to the initial state (factory setting).With the tray open, keep pressing [:/6] and [5/9] (49) on the main unitsimultaneously for 5 or more seconds.