Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

16Auto Setup (with Q Link Functions)If you do not have a Q Link TV, ignore this page and go to page 17.The Preset Download function can automatically copy the tuning position of all available TV stations into the DVD Recorder’s memory whenyou connect the DVD Recorder using a fully-wired 21-pin Scart lead to a TV equipped with the Q Link function.To Set Up this DVD Recorder with a brand-new Q Link TVPerform the following operation steps exactly as described to ensure that the Preset Download function works correctly.≥First of all, make sure that the DVD Recorder is switched off.1 Switch the TV on. The TV automatically starts to tune all available TV stations and to adjust theclock. (This is called Auto Setup function.)≥When the TV has finished its own auto setup, the DVD Recorder is automatically switched on, and thedownloading of the setup data from the TV to the DVD Recorder starts.2 Switch [DVD, TV] (19) to “DVD”.3 When Download has finished, the screen for the Owner ID setting menu appears. Press [1](10) and the numeric buttons (4) to enter a 4-digit PIN number.≥Make sure that you will remember the PIN number (make a note of it).4 Press [ENTER] (10). The cursor moves to “Name”.5 Press [1] (10).6 Press [3, 4, 2, 1] (10) to select a letter and then press [ENTER] (10).7 Enter “House No.” and “Postcode” in the same way.8 Press [RETURN] (28) to make the Owner ID setting disappear.RETURNDownloadDownload in progress, please wait.RETURN : to abortPos 4Indication during downloadingMenu for Owner ID settingRETURNOwner IDRETURN : leaveNameHouse No.PostcodePIN number ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢Hint≥If you use a Panasonic Q Link TV and perform the operation step 1 above, starting the downloading of the setup data will automaticallydisplay the “Download” indication. However, in case of a TV of another make, the “Download” indication may not appear. In this case, selectthe AV input on your TV if you want to see the “Download” indication.Note≥The explanations in this book refer to Panasonic Q Link TV and DVD Recorder, however they may also apply to other makes of TV and DVDRecorder with similar functions to Q Link. (See page 13 for details.)≥If you accidentally switch on the DVD Recorder before the TV, downloading of the setup data from the TV may not be performed correctly. Inthis case, follow the steps below.1) Wait until the Auto Setup is complete on both the TV and the DVD Recorder.2) Press [FUNCTIONS] (11) to display the FUNCTIONS window on the TV screen and then use [3, 4, 2, 1] (10) to select “SETUP” andpress [ENTER] (10).3) Use [3, 4, 2, 1] (10) to select “Tuning” and then “Download”.4) Press [ENTER] (10) and select “Yes”. Downloading of the setup data from the TV to the DVD Recorder starts.5) When the programme position and the current time appear in the DVD Recorder display, downloading is complete.STARTFINISH