Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

67Changing the unit’s settings (continued)Channel SettingsPreparation≥Switch [DVD, TV] (19) to “DVD”.≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.Selecting the manual tuning1 Use [3, 4, 2, 1] (10) to select “SETUP” and press[ENTER] (10).≥The SETUP screen appears.2 Use [3, 4] (10) to select the “Tuning” tab andpress [2] or [1] (10).3 Use [3, 4] (10) to select “Manual” and press[ENTER] (10).4 Use [3, 4] (10) to select the TV station that youwant to tune and press [ENTER] (10).≥The TUNING BOX screen appears.Handling the TUNING BOX screenUse [3, 4, 2, 1] (10) to select the desired field andpress [ENTER] (10).Pos:To change the order in which the TV stations are assigned to theprogramme positions.Press the numeric buttons (4) to enter the number of the desiredprogramme position.Name:To enter or change the name of a TV station.Use [3, 4, 2, 1] (10) to enter station name and press [ENTER](10).≥If the station name needs a blank space, select the blankbetween [Z] and [¢].Channel:To enter newly available TV stations or change the channelnumber of an already tuned TV station.Press the numeric buttons (4) to enter the channel number of thedesired TV station.≥Wait a few moments until the desired TV station has been tuned.≥After the desired TV station is tuned, press [ENTER] (10).NICAM:To select the type of sound to be recorded.Use [3, 4] (10) to select “Auto”.≥Select “Off” if you want to record the normal (mono) sound duringa stereo, bilingual or NICAM broadcast, or if the stereo sound isdistorted due to inferior reception conditions.Title Page:To select the title extraction from TV guide of broadcaster.Use [3, 4] (10) to select the number between 100 and 899.≥In case of a TV station with Teletext information, the title of theTV programme is entered automatically, provided the “Title page”is correctly set.≥In case of a TV station with Teletext information, the name of theTV station is recorded automatically.≥The unit’s clock must be set correctly.≥In case of a TV station with Teletext information, it may take over30 minutes to get the title or may fail to get (pages 36, 40).5 Press [RETURN] (28).Adding, deleting and moving channelsUse this function if:≥Channels were not set correctly using automatic tuning.≥A channel that should have been set wasn’t.≥A channel’s reception is poor and you want to delete it.Preparation≥Switch [DVD, TV] (19) to “DVD”.≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.After performing steps 1 to 3 of “Selecting the manualtuning”, perform the following steps:4 Use [3, 4, 2, 1] (10) to select the desired TVstation and use the [A], [B], [C] buttons ((17), (18),(36)) to select “Delete”, “Add”, “Move”.Follow the operations below.To delete a programme position “Delete”:Press [A] (17).To insert a blank programme position “Add”:Press [B] (18).To move a TV station to another programme position “Move”:Press [C] (36), and then use [3, 4] (10) to select the newprogramme position to which you want to assign the TV station.Press [ENTER] (10).5 Press [RETURN] (28).Note≥Setting can take up to 3 minutes approximately.≥If downloading of the setup data has been performed, only theinstruction indication “Delete” appears.Hint≥If you have performed Manual Tuning to enter TV stations, the[– –] indication may appear under [Pos/Name] on the displaywhen programming a VIDEO Plus+ timer recording.ManualTuningSETUPRETURNSettingsDiscPictureSoundDisplayConnectionAuto-Setup RestartDownloadSELECTENTERTABManual TuningPos Name ChENTERRETURNSELECTPos Name ChB C DADeleteAddMove1 BBC 1 222 BBC 2 233 ITV 244 CH4 255 CH5 2667891011121314151617181920PosNameChannelNICAMTitle Page160122AutoRETURN : leaveENTER : storeManualTuning BBC 1ENTERRETURNCHANGE0 9Manual TuningPos Name ChENTERRETURNSELECTPos Name ChB C DADeleteAddMove1 BBC 1 222 BBC 2 233 ITV 244 CH4 255 CH5 2667891011121314151617181920