Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

63Changing the unit’s settings (continued)≥Underlined items are the factory presets.ª ConnectionTV Aspect (page 19)Choose the setting to suit your television and preference.[Norm (4:3)] [Wide (16:9)]TV System[PAL] [NTSC]PALSelect when connecting to a PAL or Multi-system television.Select to record television programmes and PAL input fromother equipment.NTSCSelect when connecting to a NTSC television.Select to record NTSC input from other equipment. Televisionprogrammes cannot be recorded properly.≥To change the TV system (PAL/NTSC) setting:While stopped, keep pressing [∫] (7) and [<, OPEN/CLOSE](42) on the main unit for 5 or more seconds.≥If the playback picture on the TV screen from a Video CD isn’tshown correctly:- When connecting to Multi-system TV, select “NTSC”. (Afterviewing the disc, return the setting to “PAL”.)- When connecting to PAL TV, the lower part of the picturecannot be displayed correctly during the fast forward andrewind.Norm (4:3) TV Settings (DVD-Video)You can select how to reflect the image on the TV, when youwatch 16:9 images (DVD-Video) on 4:3 TV.[Pan & Scan] [Letterbox]Pan & ScanVideo recorded for a widescreen isplayed with the sides cut off if the pan &scan was specified by the producer of thedisc. 16:9 software prohibited from beingshown in the pan & scan style will appearin the letterbox style (with black bands above and below thepicture) despite the setting here.LetterboxVideo recorded for a widescreen is played inthe letterbox style.Norm (4:3) TV Settings (DVD-RAM)You can select how to reflect the image on the TV, when youwatch 16:9 images (DVD-RAM) on 4:3 TV.[Norm (4:3)] [Pan & Scan] [Letterbox]Norm (4:3)Programmes played as recorded.Pan & ScanVideo recorded for a widescreen is played with the sides cutoff if the pan & scan format is specified at the time ofrecording.LetterboxVideo recorded for a widescreen is played in the letterboxstyle.AV1/AV2 Settings(Press [ENTER] (10) to show the following settings. To return tothe previous screen, press [RETURN] (28).)AV1 Output[Video] [S-Video] [RGB] (page 58)AV2 Input[Video] [S-Video] [RGB (PAL only)]AV2 Connection[NORMAL] [DECODER] [Ext Link 1] [Ext Link 2]NORMALWhen the VCR or a satellite receiver is connected.DECODERWhen a decoder is connected.Ext Link 1When a digital receiver which transmits a special controlsignal recordings via the 21-pin Scart cable, for example theF.U.N. receiver (TU-DSF30/S3) is connected for the linkedtimer recordings.Ext Link 2When an external equipment with a timer function isconnected for the linked timer recordings.≥If you connect an other equipment with RGB output capability tothe AV2 socket on this unit, the output signal of the equipmentmust be set to RGB when you have set “AV2 Input” to “RGB (PALonly)”.≥This setting is fixed with “NORMAL” if you set “TV System” to“NTSC”.