Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

58Connecting external equipments (continued)Connecting a DecoderDecoder here refers to the device used to decode scrambledbroadcasts (Pay TV).(1) Decoder (not supplied)(2) 21-pin Scart socket(3) 21-pin Scart cable (not supplied)Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket on the unit and to the 21-pin Scart socketon the decoder.Connect the decoder’s mains lead to an AC mains socket.Set “AV2 Connection” to “DECODER”. (page 63)≥If you connect an other equipment with RGB output capability tothe AV2 socket on this unit, the output signal of the equipmentmust be set to RGB when you have set “AV2 Input” to “RGB (PALonly)”. (page 63)Note[RGB] means separate Red/Green/Blue colour signals. If youconnect a TV equipped with RGB input capability to the AV1socket on this unit, and a decoder equipped with RGB outputcapability to the AV2 socket, the TV can receive RGB signal inputfrom the decoder via the unit.Connecting a satellite receiver or digitalreceiver(1) Satellite receiver (not supplied)(2) 21-pin Scart socket(3) 21-pin Scart cable (not supplied)Connect a 21-pin Scart cable (not supplied) to the AV2 21-pin Scart socket on the unit and to the 21-pin Scart socketon the satellite receiver.Connect the satellite receiver’s mains lead to an AC mainssocket.Set “AV2 Connection” to, “Ext Link 1” or “Ext Link 2”.(page 63)≥If you connect an other equipment with RGB output capability tothe AV2 socket on this unit, the output signal of the equipmentmust be set to RGB when you have set “AV2 Input” to “RGB (PALonly)”. (page 63)RF INRF OUTOPTICAL AV1 (TV)AV2 (DECODER/EXT)DIGITAL AUDIO OUT(PCM/BIT STREAM)R - AUDIO - L VIDEO S-VIDEOR - AUDIO - L VIDEO S-VIDEOAV4 INOUT(1)(2)(3)RF INRF OUTOPTICAL AV1 (TV)AV2 (DECODER/EXT)DIGITAL AUDIO OUT(PCM/BIT STREAM)R - AUDIO - L VIDEO S-VIDEOR - AUDIO - L VIDEO S-VIDEOAV4 INOUT(1)(2)(3)