Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

53Editing still pictures (continued)Protect/Releasing protection[SD/CARD] [RAM]You can set/release protection for whole folders or for individual stillpictures.After performing steps 1 to 2 of “Displaying still pictures(Album Display)” (page 50), perform the following steps:3 Select the folder for displaying to set/release theprotection. (page 49)4 Use [3, 4] (10) to select “Protect” and press[ENTER] (10).5 Use [3, 4, 2, 1] (10) to select “Folder” or stillpicture you wish to protect/unprotect and press[ENTER] (10).≥Repeat this if you set/release protection of more than one stillpicture.ª To select all the still pictures in the folderUse [3, 4, 2, 1] (10) to select “Folder” and press [ENTER](10).(A check mark appears on the folder’s name; check marksinputted separately will be erased.)To cancel check marks:Use [3, 4, 2, 1] (10) to select the folder or still picture withthe check mark and press [ENTER] (10).6 Use [3, 4, 2, 1] (10) to select “Protect”/“Cancel”and press [ENTER] (10).≥The confirmation screen appears.7 Use [2, 1] (10) to select “Yes” and press [ENTER](10).≥The padlock mark appears/disappears on the selected folderor still picture.ª To stop partway throughSelect “No” in step 7 and press [ENTER] (10).OrPress [RETURN] (28).Print (DPOF)[SD/CARD]You can select a whole folder or individual pictures for printing andspecify the number of prints to be made (maximum 999 files).After performing steps 1 to 2 of “Displaying still pictures(Album Display)” (page 50), perform the following steps:3 Select the folder for displaying to set the DPOF.(page 49)4 Use [3, 4] (10) to select “Print (DPOF)” and press[ENTER] (10).5 Use [3, 4, 2, 1] (10) to select “Whole” or stillpictures you wish to print and press [ENTER] (10).≥Repeat this if you print more than one still picture.ª To select all the still pictures in the folderUse [3, 4, 2, 1] (10) to select “Whole” and press [ENTER](10).(A check mark appears on the folder’s name; check marksinputted separately will be erased.)To cancel check marks:Use [3, 4, 2, 1] (10) to select the folder or still picture withthe check mark and press [ENTER] (10).6 Use [3, 4, 2, 1] (10) to select “DPOF” and press[ENTER] (10).≥The confirmation screen appears.7 Confirm that “Number of prints” is selected and use[2, 1] (10) to set number of pages (0 to 9).8 Use [3, 4, 2, 1] (10) to select “Set” and press[ENTER] (10).≥The DPOF mark appears if you set one or morepictures to print.ª To stop partway throughSelect “Cancel” in step 8 and press [ENTER] (10).OrPress [RETURN] (28).ª To change print (DPOF) settings1) In step 5, use [3, 4, 2, 1] (10) to select “Whole” or a stillpicture with DPOF mark and press [ENTER] (10).2) Use [3, 4, 2, 1] (10) to select “DPOF” and press [ENTER](10).3) Use [2, 1] (10) to change the print setting.≥The print setting will be cancelled if you set number of pagesto “0”.4) Use [3, 4, 2, 1] (10) to select “Set” and press [ENTER](10).For your reference≥Settings cannot be made for folders and files not in accordancewith DCF standards.≥Print settings (DPOF) made using this unit may not be viewableon other equipment.≥Settings cannot be made if there is no remaining space on thecard.≥All settings made on other equipment, except the number ofprints, will be canceled.JPEGProtectRETURNENTERSELECTInput PC CARD 100CDPFPSelect Page0 – 91 / 1Back NextFolder ProtectCancel- - - - - - - - - - - -- - - -0002 00030004 - - - -0001JPEGDPOFRETURNENTERSELECTInput PC CARD 100CDPFPSelect Page0 – 91 / 1Back NextWhole DPOF- - - - - - - - - - - -- - - -0002 00030004 - - - -0001