Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

9The remote control (continued)Television operationYou can control televisions by changing the remote control code.Preparation≥Turn on the television.≥Switch [DVD, TV] (19) to “TV”.1 Refer to the chart below for the code for yourtelevision.2 Press and hold [TV, Í] (20) and enter the two-digitcode with the numeric buttons (4).≥For example: 01, press [0]>[1].≥After entering the code, test the remote control by turning onthe television and changing channels.Note≥If there is more than one code, repeat the procedure until you findthe code that allows correct operation.≥Repeat this procedure after you change the batteries.≥If your television brand is not listed or if the code listed for yourtelevision does not allow control of your television, this remote isnot compatible with your television.List of TVs Compatible with the unit’s Remote ControlBrand: CodePanasonic 01, 02, 03, 04, 44AIWA 35AKAI 27, 30BLAUPUNKT 09BRANDT 10, 15BUSH 05, 06CURTIS 31DESMET 05, 31, 33DUAL 05, 06ELEMIS 31FERGUSON 10GOLDSTAR/LG 31GOODMANS 05, 06, 31GRUNDIG 09HITACHI 22, 23, 31, 40, 41, 42INNO HIT 34IRRADIO 30ITT 25JVC 17, 39LOEWE 07METZ 28, 31MITSUBISHI 06, 19, 20MIVAR 24NEC 36NOKIA 25, 26, 27NORDMENDE 10ORION 37PHILIPS 05, 06PHONOLA 31, 33PIONEER 38PYE 05, 06RADIOLA 05, 06SABA 10SALORA 26SAMSUNG 31, 32, 43SANSUI 05, 31, 33SANYO 21SBR 06SCHNEIDER 05, 06, 29, 30, 31SELECO 06, 25SHARP 18SIEMENS 09SINUDYNE 05, 06, 33SONY 08TELEFUNKEN 10, 11, 12, 13, 14THOMSON 10, 15TOSHIBA 16WHITE WESTINGHOUSE 05, 06Operation: ButtonOn and off: [TV, Í] (20)Video input mode: [AV] (21)Channels: [W, X, CH] (23)Volume: [i, j, VOLUME] (24)Numeric: [0–9, – /– –] (4)ªThe 3 methods for switching to the AV input on yourPanasonic TVYour Panasonic TV uses one of 3 different methods for switchingbetween TV reception and the AV input(s). Perform the operationssteps listed for the switching methods A, B and C below todetermine which one your Panasonic TV uses.A1) Switch [DVD, TV] (19) to “TV”.2) Press [AV] (21) to switch to the AV input.Each press of [AV] (21) switches between “TV reception” and“AV input(s)”.B (for the remote control code No.44)1) Switch [DVD, TV] (19) to “TV”.2) Press [AV] (21).Colour bars for selecting the AV input appear on the TVscreen.3) Follow the instructions displayed on the TV screen to selectthe desired AV input from the displayed colour bars for the AVinput by pressing [A] (17), [B] (18), [C] (36) or [D] (35) on theremote control.C (for the remote control code No.01)1) Switch [DVD, TV] (19) to “TV”.2) Press [AV] (21).The last previously selected AV input indication appears on theTV screen. The indications for selecting another AV input alsoappear, but they disappear a few seconds later.3) Before the indications for selecting another AV inputdisappear, press [A] (17), [B] (18), [C] (36) or [D] (35) toselect the desired AV input.With the following four buttons, you can move and select asfollows:[A] (17):Move left[B] (18):Move down[C] (36):Move up[D] (35):Move right