Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

49Playing still picturesInserting/Removing the SD/PC Card[SD/CARD]≥When the card indicator (“SD” or “CARD”) on the unit display isflashing, the card is being read from or written to. Do not turn offthe power or remove the card. Such action may result inmalfunction or loss of the card’s contents.ªSD card slotInserting the card(1) Press down.(2) Turn the label up with the notch facing in.(3) Insert the card straight-in until it fits into place.(4) Lift the tab until it clicks into place flush with card.Removing the card(1) Press down.(2) Press on the center of the card.≥Raise the guard after removing the card.ªPC card slotInserting the card(a) Hold the edge of the card and insert until it fits into place.≥Do not press directly on the memory card.(b) 2 Align to match the mark.(c) Terminal connections facing into the unit.(d) The labelled side facing upwards.Removing the card(1) Push(2) PC card eject button comes out.(3) Push again≥If using the adaptor, remove the adaptor and card together.≥If PC card eject button (40) on the unit does not come out,To remove the PC card, press the card in once more andthen repeat steps (1)–(3).Selecting the drive and the folder[SD/CARD] [RAM]1) While stoppedPress [FUNCTIONS] (11).2) Use [3, 4, 2, 1] (10) to select “JPEG” and press [ENTER](10).3) Use [3, 4] (10) to select “Input” and press [ENTER] (10).4) Use [2, 3, 4] (10) to select the drive (SD CARD/PC CARD/DVD) and press [1] (10).≥A list of the validfolders in the driveappears.(a)drive(b)Folder name(c)Folder number(d)Numbers of scenes(still pictures) andfiles that are in theselected folder5) Use [3, 4] (10) to select the still picture folder.≥You can also select the still picture folder by entering a 3-digitnumber with the numeric buttons (4).≥It is possible to give the folder a title.6) Press [ENTER] (10).For your reference≥“Scene” and “File” refer to numbers inside the folder selected.Lower files are not included.≥If there is more than one upper folder, pressing [:] or [9](6) will switch between them. (See “Folders that can bedisplayed/saved”, page 12)To give a folder a titleIt is possible to enter up to 36 characters.After selecting the still picture folder for display (step 5 of“Selecting the drive and the folder”),1) Use [1] (10) to select “Folder title” and press [ENTER] (10).2) Enter the title. (page 36)Note≥Titles inputted using this unit will not be displayed on otherequipment.≥Folder titles entered using this unit will only be displayed usingthis unit. Folders entered using this unit are written to theTITLE.DVD file.≥If there is not enough space for the entry or if the limit for thenumber of files has been exceeded (page 12), the title cannot beentered.[SD/CARD] [RAM]≥When the card is protected (page 12) or the disc is protected(page 37, 74), it is not possible to erase the still pictures.Only insert or remove the SD/PC card after turning theunit off.Discs:It is not possible to open the disc tray while the still picturesscreen is displayed.(1) (3) (2)(4)Card(1) (2)(a)(b)(c) (d)(1) (2) (3)JPEGRETURNENTERSELECTInput PC CARD 100CDPFP1/2AlbumSlide ShowCopyCopy all of cardJPEGJPEGInputRETURNENTERPC CARD 100CDPFP\DCIM\100CDPFPScene 0046File 0046001 100CDPFP(c)33111111110 – 9No.(d)(b)DVDPC CARDSD CARD(a)