Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

68Changing the unit’s settings (continued)Auto-Setup Restart, DownloadYou can use the SETUP menus to start Auto Channel setting ifAuto Setup (page 17) fails for some reason.Preparation≥Switch [DVD, TV] (19) to “DVD”.≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.After performing steps 1 to 2 of “Channel Settings”(page 67),perform the following steps:3 Use [3, 4] (10) to select “Auto-Setup Restart” or“Download”.4 Press [ENTER] (10) to prepare for Auto Setup startor Download start.≥Press [ENTER] (10) again to actually start the Auto Setup orthe Download.5 A message appears asking you to confirm theoperation.≥Actual screens depend on the operation. Follow the on-screen instructions.Changing the Owner IDYou can change the [PIN number], [Name], [House No.] and[Postcode].Preparation≥Switch [DVD, TV] (19) to “DVD”.≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.1 Use [3, 4, 2, 1] (10) to select “SETUP” and press[ENTER] (10).≥The SETUP screen appears.2 Use [3, 4] (10) to select the “Settings” tab andpress [2] or [1] (10).3 Use [3, 4] (10) to select “Owner ID” and press[ENTER] (10).4 Use [1] (10), and then use the numeric buttons (4)or [3, 4, 2, 1] (10) to enter the current[PIN number].≥After entering the correct [PIN number], you can change the[Name], [House No.] and [Postcode].5 Press [ENTER] (10) to conclude the setting.6 Use [3, 4, 2, 1] (10) and [ENTER] (10) to selectand change the desired information.7 Press [RETURN] (28) to exit the Owner ID settingmenu.ªTo Display the Owner ID setting menuWhile stoppedHold down [∫] (7) on the main unit for more than 5seconds.≥The PIN number is not displayed.≥After 30 seconds, this menu automatically disappears.Shipping ConditionThe all settings in the SETUP screen return to the factory settings.(except for the ratings level and the password, and owner IDsettings.)Preparation≥Switch [DVD, TV] (19) to “DVD”.≥Press [FUNCTIONS] (11) to show the FUNCTIONS window.After performing steps 1 to 2 of “Clock Settings”(page 66),perform the following steps:3 Use [3, 4] (10) to select “Shipping Condition” andpress [ENTER] (10).4 Use [2, 1] (10) to select “Yes” and press [ENTER](10).5 Use [2, 1] (10) to select “Yes” and press [ENTER](10).RETURNOwner IDRETURN : leaveNameHouse No.PostcodePIN number ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢Yes NoENTERRETURNTuningSETUPSettingsDiscPictureSoundDisplayConnectionShipping ConditionWarning—all storedtuning data will be lost !Do you want to proceed ?