Panasonic DMR-E60 Operating Instructions Manual

Also see for Diga DMR-E60: Operating instructions Firmware instructions Operating instructions

Contents

21Playing discs (continued)Quick View (Playk1.3)[RAM]During play or Time Slip, you can play faster than the normal playto save time by Quick View function.During playPress and hold [1] (26) for about 1 second.≥Press [1] (26) to return to normal play.≥You cannot use this feature if the “PLAY k1.3 & Audio duringSearch” of “Sound” is “Off” (page 62).≥This feature can be activated only on DVD-RAM recorded withDolby Digital.≥Simultaneous recording and play with Quick View (Play k1.3) ispossible only during SP, LP and EP recording mode.≥Quick View (Play k1.3) cannot operate when “editing menu” isdisplayed. (pages 41, 43, 44, 45)≥During Quick View (Play k1.3), the Digital Audio Output willchange to PCM Output.≥Seamless Play does not work when using Quick View. (page 62)Starting play from where you stopped it(Resume Function)[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]1 During playPress [∫] (7).≥The unit remembers the position.2 Press [1] (26).≥Play starts from where you stopped it.ªTo cancel the resume functionPress [∫] (7) while the unit remembers the position.(The position is also cleared when you turn the unit off.)ªTo start play from a memorized position after turningthe unit offPress [POSITION MEMORY] (18) during play.(The message “Position Memorized” appears on the television.)Now when you press [1] (26) after switching the unit to standbyand back on, play starts from the memorized position.For your reference[DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]≥The position memorized when you press [∫] (7) or[POSITION MEMORY] (18) is cleared when you open the disctray.[RAM]≥The position memory is written to the disc and remains intact untilyou mark a different position.You cannot mark positions if the disc is write-protected with DISCINFORMATION (page 37) or with the write protect tab (page 74).Release the protection before marking position.≥If you press [∫] (7) before switching the unit to standby afterpressing [POSITION MEMORY] (18) to memorize a position,play will resume from the position you pressed [∫] (7) when youpress [1] (26).Fast forward and rewind—SEARCH[RAM] [DVD-R] [DVD-A] [DVD-V] [CD] [VCD] [MP3]During playPress [6, SLOW/SEARCH] or [5, SLOW/SEARCH](25).[6]: backward[5]: forward≥If using the [:/6] or [5/9] (49) button on the unit,keep pressing the button for 1 or more seconds.≥There are 5 search speeds. Each press increases the searchspeed.≥The search speed is maintained when you release the button.≥Press [1] (26) to return to normal play.≥You will hear sound at speed one (only forward) when playingDVD-RAM, DVD-R, DVD-Audio, DVD-Video and Video CDs. Youcan turn this sound off if you want to (page 62, “Sound”—“PLAY k1.3 & Audio during Search”).≥Sound is not heard during chasing play and simultaneousrecording and play.Slow-motion play[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]While pausedPress [6, SLOW/SEARCH] or [5, SLOW/SEARCH](25).[6]: backward (does not work with Video CDs)[5]: forward≥If using the [:/6] or [5/9] (49) button on the unit,keep pressing the button for 1 or more seconds.≥There are 5 slow-motion speeds. Each press increases the slow-motion speed.≥The slow-motion speed is maintained when you release thebutton.≥Press [1] (26) to return to normal play.Frame-by-frame viewing[RAM] [DVD-R] [DVD-A] (Motion picture parts only) [DVD-V] [VCD]Remote control onlyWhile pausedPress [2;, FRAME] or [;1, FRAME] (12) or [2, 1](10).[2;] or [2]: backward (does not work with Video CDs)[;1] or [1]: forward≥Each press shows the next or previous frame.≥Press [1] (26) to return to normal play.PLAY x1.3L RDVD-RAM• • • •L RDVD-RAM