Troubleshooting8-48.2 What to Do If an Error Occurs8.2.1 ERR/ALM LED Flashes SituationA syntax error or self-diagnostic error has occurred. The following shows the procedure whena positioning error has occurred. SolutionPROCEDURE1. Check the error code using the programming tool.If a PLC error occurs during programming or debugging, the "Status Display"dialog box will appear automatically.2. In the case of the positioning operation error, press the [Positioning errors]button.The channel number where the positioning error has occurred and the error codeoccurred when using the table setting mode appears.3. Press the [Clear Error Log] button .A confirmation message appears.
