11.1 FP Mode11-3ItemSpecificationsConventionalmodelFPΣ seriesFP0H seriesFPΣ modeFP0H modeValues in [ ] are forC32E only.Potentiometer input(DT90040/90041) K0 to K1000 K0 to K1000 (C32 only) K0 to K4000 (C32 only)High-speed counter/Pulseoutput(Note 1)4 chs / 2 chsThe same area is usedfor both special relaysand special dataregisters.4 chs / 2 chsThe same area is usedfor both special relaysand special dataregisters.4chs / 4 chsThe used areas forspecial relays andspecial data registersare independent.(Note 1): For details of the high-speed counter/pulse output functions, refer to "FP0H User's Manual(Positioning/PWM Output/High-speed Counter)".11.1.2 Converting Projects for FPΣ to Projects for FP0H (FPΣ Mode)Projects for the conventional model FPΣcan be converted to projects for FP0H (FPΣ) by"Convert PLC Type" function. The following procedure is explained on the condition that aproject for FPΣhas been already started on FPWIN GR7.PROCEDURE1. Select "Tools" > "Convert PLC Type" in the menu bar.2. Select "FP0H" from the list on the left.3. Select "FP0HC32T/P" or "FP0H C32ET/EP" and press the [OK] button.4. The "Convert PLC Type" function will be executed and projects for FP0Hwill be converted to projects for FP0H.
