FP Mode11-611.2.2 High-speed Counter Instructions F165 (CAM0), F166 (HC1S), F167(HC1R)For the FPΣ mode, the following contents are common to FPΣ.- Operations when instructions are executed- Allocation of memory areas Operations when instructions are executedIn the FP0H mode, operations vary according to the system register no. 402 "Pulse/PWMoutput settings".Instruction Conventional modelFPΣ seriesFP0H seriesFPΣ mode FP0H modeF165(CAM0) No instruction No system registersettingWhen the destination Y* when thetarget value matches is other than thenormal output setting, an operationerror occurs.F166(HC1S)F167(HC1R)No system registersettingNo system registersettingWhen the destination Y* when thetarget value matches is other than thenormal output setting, an operationerror occurs. Allocation of memory areasConventional model FPΣ series and FP0H series (FPΣ mode)Channel no. Input Reset input Elapsed value Target value Control flagCH0 X0 X2 DT90044DT90045DT90046DT90047 R903ACH1 X1 X2 DT90048DT90049DT90050DT90051 R903BCH2 X3 X5 DT90200DT90201DT90202DT90203 R903CCH3 X4 X5 DT90204DT90205DT90206DT90207 R903DFP0H series (FP0H mode)Channel no. Input Reset input Elapsed value Target value Control flagCH0 X0 X2 DT90300DT90301DT90302DT90303 R9110CH1 X1 X2 DT90304DT90305DT90306DT90307 R9111CH2 X3 X5 DT90308DT90309DT90310DT90311 R9112CH3 X4 X5 DT90312DT90313DT90314DT90315 R9113
