Settings of Control Unit4-164.2.4 Saving Positioning Parameters Saving positioning parametersInformation on positioning parameters and positioning data tables set on Configurator PMX issaved as part of program files.PROCEDURE1. Select “File” > “Save changes and exit” from the menu bar.A confirmation message box appears.2. Press [Yes].The set information will be saved as part of project files. Export and Import• Basic parameters and positioning parameters set can be exported to and imported from theConfigurator PMX.• Information on positioning parameters and positioning tables saved by using the exportfunction can be reused between projects.PROCEDURE1. Select “File” > “Export” from the menu bar.The saving destination and file names appear.2. Enter a saving destination and file name, and press [Save] button.Information on the parameters and positioning data tables will be saved in a filewith a “.pmx” extension.KEY POINTS• When export is executed, information on the positioning data tables will besaved along with parameters set in the parameter setting menu.
