Note• To copy values from one location to another, click Copy to.• If the Channel Attribute setting of the port is "Additional", the setting cannot be changed.Maintenance Console Location9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port PropertyCalled PartyThe Shelf, Slot, and Port for each item are displayed for your reference. For details, see CommonProgramming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.ConnectionIndicates the port status. To change the status of the port, click the desired cell in the column, and then selectINS or OUS for the port.This option is only available in On-line mode.Value RangeINS: The port is in service.OUS: The port is out of service.Fault: The port is not communicating with the network.Maintenance Console Location9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port PropertyNumber FormatSpecifies the format of an incoming call number.Value RangeInternational, +International, NationalMaintenance Console Location9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port PropertyTypeSpecifies the header of the incoming SIP message in which the dialled number is stored.Value RangeRequest-URI, To headerMaintenance Console Location9.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port PropertyPC Programming Manual 2659.10 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
