23.3.1 UM Configuration—[4-3] Service Settings—CustomService—Menu & TransferThe below parameters are set for the Menu Transfer Custom Service in the Custom Service Builder.This Custom Service type guides callers to press certain buttons to connect themselves with the designatedparty. The prompt for this service can be recorded in the CS No. dialogue box.Custom Service prompts can be recorded only in On-line mode.DescriptionThe information typed in this field is for reference only.Value RangeMax. 32 charactersMaintenance Console Location23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & TransferFeature Guide References3.2.1.15 Custom ServicePrompt ModeSpecifies the language for prompts used by this Custom Service.Note• This parameter overrides a set "Incoming Call Service Prompt".• If "Primary" is selected, the default language which is selected from all installed languages will be used.• If "None" is selected, the prompt mode of previous process will be continued, or "Primary" languagewill be selected.Value RangeNone, Primary, Guidance No. 1-8Maintenance Console Location23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & TransferPC Programming Manual References22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group— Day, Night, Lunch, andBreak Mode - Incoming Call Service PromptFeature Guide References3.2.1.15 Custom Service924 PC Programming Manual23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
