9.33 PBX Configuration—[1-1]Configuration—Slot—DOORPHONE Card—CardPropertyThe doorphone card’s settings can be programmed.The Shelf, Slot, and Port for each item are displayed for your reference. For details, see CommonProgramming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.Port StatusSpecifies the port’s status.This option is only available in On-line mode.Value RangeINS: The port is in service.OUS: The port is out of service.Fault: There is a communication error.Maintenance Console Location9.33 PBX Configuration—[1-1] Configuration—Slot—DOORPHONE Card—Card PropertyFor Output - Device TypeSelects the type of connected output device (for output ports only).Value RangeRinger, Relay, Door OpenerMaintenance Console Location9.33 PBX Configuration—[1-1] Configuration—Slot—DOORPHONE Card—Card PropertyFor Sensor - Input Signal Decision TimeSpecifies the minimum duration of continuous input from the triggered sensor before the PBX recognises theinput and makes a sensor call.Value Range32 ´ n (n=2–255) msMaintenance Console Location9.33 PBX Configuration—[1-1] Configuration—Slot—DOORPHONE Card—Card PropertyFor Sensor - Input Signal Detection Reopening TimeSpecifies the length of time after the sensor has been triggered during which any further input from the sensorwill be ignored.PC Programming Manual 4139.33 PBX Configuration—[1-1] Configuration—Slot—DOORPHONE Card—Card Property
