CS NameSpecifies the CS name of the port.Value RangeMax. 20 charactersMaintenance Console Location9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port PropertyConnectionIndicates the port status. To change the status of the port, click the desired cell in the column, and then selectINS or OUS for the port.This option is only available in On-line mode.Value RangeINS: The port is in service.OUS: The port is out of service.Fault: The port is not communicating with the network.Maintenance Console Location9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port PropertyIP Codec PrioritySpecifies the codec used for compression and decompression of transmitted data.Value RangeG.711, G.729AMaintenance Console Location9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port PropertyPacket Sampling Time (G.711)Specifies the time interval between measurements (samples) of sound data during a conversation.The smaller this number, the higher the quality of the transmitted sound.Value Range20 ms, 30 ms, 40 ms, 50 ms, 60 msMaintenance Console Location9.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port PropertyPacket Sampling Time (G.729A)Specifies the time interval between measurements (samples) of sound data during a conversation.PC Programming Manual 3339.18 PBX Configuration—[1-1] Configuration—Slot—V-IPCS—Port Property
