11.6 PBX Configuration—[3-6] Group—ExtensionHunting GroupIf an extension within an idle extension hunting group is called when it is busy or in DND mode, the call canbe redirected to another extension in the same hunting group, according to a pre-programmed hunting type.If there is no idle extension in the group, the call can then be redirected to the overflow destination, which canbe different depending on the time mode (day/lunch/break/night). A maximum of 64 hunting groups can beprogrammed, each containing up to 16 extensions.To assign members to the group, click Member List. To assign extensions as overflow destinations easily,click Destination Setting (see 2.1.6 Extension Number Setting).Hunting Group NameSpecifies the name of the hunting group.Value RangeMax. 20 charactersMaintenance Console Location11.6 PBX Configuration—[3-6] Group—Extension Hunting GroupFeature Guide References2.2.1 Idle Extension HuntingHunting TypeSpecifies the hunting type for the hunting group.Value RangeCircular: Circulates until the call is answered or overflowedTerminated: Terminates at the last extensionMaintenance Console Location11.6 PBX Configuration—[3-6] Group—Extension Hunting GroupFeature Guide References2.2.1 Idle Extension Hunting5.1.2 GroupOverflow—Day, Lunch, Break, NightSpecifies the overflow destination of an unanswered call in each time mode.Value RangeMax. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])PC Programming Manual 59911.6 PBX Configuration—[3-6] Group—Extension Hunting Group
