16.2 PBX Configuration—[8-2] ARS—LeadingNumberSpecifies the area codes and/or telephone numbers as leading numbers that will be routed by the ARS feature.A maximum of 1000 different leading numbers can be programmed, and each leading number can select aRouting Plan Table number, which determines the ARS procedure.The additional (remaining) number of digits can also be specified for each leading number. The additional(remaining) number of digits must be specified only when "#", for example, is needed after the dialled number.The "#" will be added after the programmed number of digits of the user-dialled number (excluding the leadingnumber).100 leading numbers are displayed at a time. To display other sets of leading numbers, click the applicabletab.Leading NumberSpecifies the leading number.Value RangeMax. 16 digits (consisting of 0–9, *, #, and X)Maintenance Console Location16.2 PBX Configuration—[8-2] ARS—Leading NumberFeature Guide References2.8.1 Automatic Route Selection (ARS)Additional Number of DigitsSpecifies the additional (remaining) number of digits following each leading number.Value Range0–15Maintenance Console Location16.2 PBX Configuration—[8-2] ARS—Leading NumberFeature Guide References2.8.1 Automatic Route Selection (ARS)Routing Plan NumberSpecifies the Routing Plan Table number used for each leading number.Value Range1–48PC Programming Manual 78916.2 PBX Configuration—[8-2] ARS—Leading Number
