9.24 PBX Configuration—[1-1]Configuration—Slot—Port Property - LCO PortVarious settings can be programmed for each analogue trunk port.The Shelf, Slot, and Port for each item are displayed for your reference. For details, see CommonProgramming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.Port TypeSelect to use the port with either the CO, MOH, or External Pager features. (Only LCOT6 is installed bydefault.)2 ports, an odd and an even port, are programmed in a pair.Value RangeCO, MOH, External PagerMaintenance Console Location9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO PortInstallation Manual References4.3.4 LCOT6 in KX-NS500 (installed by default)ConnectionIndicates the port status. To change the status of the port, click the desired cell in the column, and then selectINS or OUS for the port.This option is only available in On-line mode.This option can only be changed when CO is selected for the Port Type.Value RangeINS: The port is in service.OUS: The port is out of service.Maintenance Console Location9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO PortBusy Out StatusIndicates the Busy Out status (reference only).Value RangeNormal, Busy OutMaintenance Console Location9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port366 PC Programming Manual9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
