PC Programming Manual References12.1.2 PBX Configuration—[4-1-2] Extension—Wired Extension—FWD/DND12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DNDFeature Guide References2.2.2.2 Group Call DistributionTenant NumberSpecifies the tenant to which the incoming call distribution group belongs, to determine the Time Table andthe audio source for the group. (The tenant number corresponds to the Time Table number.)Value Range1–8Maintenance Console Location11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group SettingsPC Programming Manual References10.2 PBX Configuration—[2-2] System—Operator & BGM10.4 PBX Configuration—[2-4] System—Week Table14.6 PBX Configuration—[6-6] Feature—Tenant— Music On HoldFeature Guide References2.13.4 Music on Hold5.1.3 Tenant ServiceCOSSpecifies the COS of the incoming call distribution group. Depending on the COS, calls from certain extensionsare restricted as determined by the Internal Call Block feature. Also, when calls are forwarded or overflowedto a trunk, the TRS/Barring assigned for the COS of the incoming call distribution group applies.Value Range1–64Maintenance Console Location11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group SettingsPC Programming Manual References10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call BlockPC Programming Manual 58111.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
