9.37.1.1 PBX Configuration—[1-5-1] Configuration—DSPResource—Setting—DSP Resource AdvisorThe DSP Resource Advisor assists programmers in the allocation of DSP resources to various PBX functions.1. Note the value of Total Power. This is the total capacity for allocating DSP resources, depending on theDSP card installed in the PBX.2. In the Ports column, enter the number of ports to allocate to each PBX function.3. For voice calls, it is useful to estimate how often each call function is used, as every extension or trunk isnot in use all the time. In the Busy Ratio (%) column, specify the anticipated ratio of time the type of voicecall function will be used.4. As values are entered, the values in the Power column will increase to reflect the resource required forthe input amounts. Likewise, the value for Free resources (G.711) will decrease.NoteClick Clear to reset the input values and start again.5. When all items are allocated, confirm that the amount of resources input does not exceed the valueindicated in Total Power.• Click Apply to insert the specified allocation settings into the DSP Resource—Setting screen.• Click Cancel to return to the DSP Resource—Setting screen without making any changes.For details, refer to "5.5.4.2 DSP Resource Advisor" in the Feature Guide.PC Programming Manual 4259.37.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting
