12.2.6 PBX Configuration-[4-1-6]Extension—Portable Station—Simplified Voice MessageFeature Guide References2.16.3 Built-in Simplified Voice Message (SVM)SVM Cyclic Tone DetectionSpecifies the SVM cyclic tone detection mode.Value RangeFixed, OptionMaintenance Console Location13.3.3 PBX Configuration-[5-3-3] Option Device - Voice Message - SVMFeature Guide References2.16.3 Built-in Simplified Voice Message (SVM)SVM Cyclic Tone Option—Tone On Maximum TimeSpecifies the maximum duration of the cyclic tone that will be recognised by the PBX. When the tone sentfromthe telephone company is shorter than the value set here, the PBX recognises it as a tone-on.Note that this option can only be set when SVM Cyclic Tone Detection on this screen is set to "Option".Value Range20 x n (n=6–200) msMaintenance Console Location13.3.3 PBX Configuration-[5-3-3] Option Device - Voice Message - SVMPC Programming Manual References9.1 PBX Configuration—[1-1] Configuration—SlotFeature Guide References2.16.3 Built-in Simplified Voice Message (SVM)SVM Cyclic Tone Option—Tone Off Maximum TimeSpecifies the maximum time that the PBX waits for a cyclic tone to be sent from the telephone company beforerecognising it as a tone-off. When no tone is detected within the time set here, the PBX recognises it as atone-off.Value Range20 x n (n=6–200) msPC Programming Manual 75113.3.3 PBX Configuration-[5-3-3] Option Device - Voice Message - SVM
