4.1.2 Status—Equipment Status—CS InformationDisplays information stored by the PBX regarding each Cell Station (CS).This option is only available for the Installer level account in On-line mode and requires that the targetV-IPCS4 card be set to INS status.The displayed items are as follows:Item DescriptionShelf Number of the shelfSlot Number of the slotPort Number of the portCS Name Name of the attached CSStatus Service status of the attached CS: INS, OUS, or FAULT.If the status is FAULT, subsequent data items for that port will be leftblank.Version Version number of the programme file stored in the CSRevision Revision number of the programme file stored in the CSCSID 12-digit ID number of the CSPath Number of the wireless extension currently using each path. In the caseof a group, several extensions may be using the same floating extensionnumber.When an extension number is not registered, the display shows"OFF". The number of paths that can be used varies for each CS model.For more details, see the documentation for your CS.Group Call Number of PSs registered to the attached CS that are members of a PSRing Group.To view CS information1. From the Target CS I/F Shelf-Slot No. drop-down list, select the target shelf and slot.• To display information on a single card, select the shelf number, slot number and name of that card.• To display information on all matching cards, select "All".2. From the Interval Timer drop-down list, select the number of seconds between each automatic screenrefresh.3. If you want to save the CS information, click Capture.a. Create a file for saving the data.b. Click Start.c. Click Close.4. Click Start to begin monitoring.Monitoring will be performed and the screen will refresh according to the interval specified.5. Click Stop to end monitoring.6. If you started to save the CS information in step 3, click Capture, then click Stop to record the informationto the specified file.7. Click Close to return to the main screen.PC Programming Manual 594.1.2 Status—Equipment Status—CS Information
