Feature Guide References4.2.1 TIE Line ServiceSend CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)Enables the transfer of related CLIP information when a party on hold is transferred. When set to "Enable", thetransfer destination will receive the original caller’s CLIP information, not the information of the extension thatperformed the transfer.Value RangeDisable, EnableMaintenance Console Location10.9 PBX Configuration—[2-9] System—System OptionsFeature Guide References4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)Send CLIP of CO Caller—when call is forwarded to COSelects whether the CLIP number of the calling party or the CLIP number of the forwarding extension or virtualPS is sent to the forwarding destination to identify the origin of a trunk call.Value RangeDisable: The CLIP number assigned to the forwarding extension or virtual PS is sent.Enable: The CLIP number of the calling party is sent.Maintenance Console Location10.9 PBX Configuration—[2-9] System—System OptionsFeature Guide References2.2.2.3 Outside Destinations in Incoming Call Distribution Group4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)4.2.6 Network ICD GroupSend CLIP of Extension Caller—when call is forwarded to COSelects whether the CLIP number of the calling extension or the CLIP number of the forwarding extension orvirtual PS is sent to the forwarding destination to identify the origin of a call.Value RangeDisable: The CLIP number assigned to the forwarding extension or virtual PS is sent.Enable: The CLIP number of the calling extension is sent.Maintenance Console Location10.9 PBX Configuration—[2-9] System—System Options534 PC Programming Manual10.9 PBX Configuration—[2-9] System—System Options
