Control commands via LANYou can also control via the terminal by using the control command format via the terminal.For examples of the available commands, refer to “Control commands” (x page 127).When web control administrator rights password is set (Protect mode)Connection method1) Obtain the IP address and port number (Initial set value = 1 024) of the projector and make a requestfor connection to the projector.f Acquire the IP address from the menu screen of the projector, and the port number from the web controlpage.IP address Obtain from the [NETWORK/USB] menu → [STATUS]Port No. Obtain from [Detailed set up] → [Port set up] page of the web control2) Check the response from the projector.Data section Blank Mode Blank Random number section Termination symbolCommandexample“NTCONTROL”(ASCII string)‘ ’0x20‘1’0x31‘ ’0x20“zzzzzzzz”(ASCII code hexadecimalnumber)(CR)0x0dData length 9 bytes 1 byte 1 byte 1 byte 8 bytes 1 bytef Mode : 1 = Protect mode3) Generate a 32-byte hash value from the following data using MD5 algorithm.f “xxxxxx:yyyyy:zzzzzzzz”xxxxxx : Administrator rights user name for web control (Default user name is “dispadmin”)yyyyy : Password of above administrator rights user (Default password is “@Panasonic”)zzzzzzzz : 8-byte random number obtained in Step 2)Command data formatIt is the data format used for sending and receiving commands.r Transmitted dataHeader Data section Termination symbolCommandexampleHash value(See above"Connection method")‘0’0x30‘0’0x30Control command(ASCII string)(CR)0x0dData length 32 bytes 1 byte 1 byte Undefined length 1 byter Received dataHeader Data section Termination symbolCommandexample‘0’0x30‘0’0x30Control command(ASCII string)(CR)0x0dData length 1 byte 1 byte Undefined length 1 byter Error responseString Details Termination symbolMessage"ERR1" Undefined control command(CR)0x0d"ERR2" Out of parameter range"ERR3" Busy state or no-acceptable period"ERR4" Timeout or no-acceptable period"ERR5" Wrong data length"ERRA" Password mismatchData length 4 bytes ― 1 byteENGLISH - 123Chapter 7 Appendix - Technical Information
