Panasonic PT-VW360 Operating Instructions Manual

Also see for PT-VW360: Operating instructions Operating instructions

Contents

USB display functionThe USB display function makes it possible to project the image and audio from the computer through a USBconverting cable.When using the USB display function on Mac, the audio output is disabled.When using on a Windows computerr Operating environmentOS Windows 7 32/64 bit, Windows 8.1 32/64 bit, Windows 10 32/64 bitCPU Intel Core 2 Duo 2.0 GHz or faster, the compatible processorAmount of memory 256 MB or more (Recommended : 512 MB or more)Hard-disk free space 20 MB or moreDisplay Resolution 640 x 480 or more, 1 600 x 1 200 or lessf There is no guarantee for all the computers that meet the above conditions will operate properly.Projecting the USB displayNotef The USB display function and the Presenter Light software cannot be used at the same time. Before using the USB display function,terminate the Presenter Light software.1) Connect the terminal of the projector to a computer with a USB cable.2) Press the button on the remote control or switch theinput source to USB DISPLAY.f You can also press the button on the control panel and select the input source in theinput guide.f The startup screen will be displayed automatically due to the driver which is built-in the projector, andexecuting the installation according to the instructions of the screen. The displaying of the auto installationscreen is depending on the settings of computer. In this case, please select “Run autorun.exe”. Pleasedouble-click “autorun.exe” in the folder of the “USB Display” when the automatic startup is disabled.f The computer screen is projected.3) Click the driver icon in the task tray (bottom right of the computer) and select one item in Pop-up menu.f Pop-up menu is only displayed in English.f The item which is displayed in gray is unavailable.[Active audio] / [Disable audio] Set whether to output the audio from the computer.[Play video] / [Pause video] Switch between playing and pausing the image.[Start] / [Stop] Set whether to display the image from the computer.[Exit] Displayed in gray and cannot be selected.Notef It will take a while when you want to project the computer screen.f Connect a USB cable directly to the USB connector of a computer. It will not work when connecting through a USB hub.f At the time that the computer screen is projected, the resolution of the computer may be forcibly changed depending on the combination ofcomputer and projector.Termination of the USB display1) When terminating the USB display, remove the USB cable directly.f There is no need to follow “Remove hardware safely” when a USB cable is disconnected.92 - ENGLISHChapter 5 Operation of Function - USB display function