1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.[FILTER COUNTER] Displays the usage time of the filter.[TIMER] Sets the replacement cycle of the air filter.[FILTER COUNTERRESET] Resets the air filter usage time.Setting [TIMER]If you want to regularly replace the air filter, set its cycle time. When the air filter usage time reaches the set time,a message of “FILTER COUNTER has reached the set time” prompting you to replace the air filter is displayed onthe projection screen.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.3) Press as to select [TIMER].4) Press qw to switch the item.f The items will switch each time you press the button.[1000 H] ~ [7000 H] Select to display the message. You can set the replacement cycle of the air filter in increments of 1000hours..[OFF] Select not to display the message.Setting [FILTER COUNTER RESET]Resets the usage time of the air filter.1) Press as to select [FILTER COUNTER].2) Press the button.f The [FILTER COUNTER] screen is displayed.3) Press as to select [FILTER COUNTER RESET].4) Press the button.5) When the confirmation screen is displayed, press qw to select [OK] and then press the button.f The display of [FILTER COUNTER] changes to “0H”.[INITIALIZE ALL]Return various setting values to their factory default settings.1) Press as to select [INITIALIZE ALL].2) Press the button.f The [INITIALIZE ALL] screen is displayed.3) When the confirmation is displayed, press qw to select [OK] and then press the button.f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF.] screen will be displayed.4) Press the button.f The operation of other buttons is disabled.f The initial setting (display language) screen will be displayed when turning on the projector next time.Notef The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.f When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of [NETWORK/USB]cannot be returned to the factory default values. For details about the initialization of [NETWORK/USB], please refer to [NETWORK/USB] →[INITIALIZE] (x page 88).ENGLISH - 81Chapter 4 Settings - [PROJECTOR SETUP] menu
