Panasonic PT-VW360 Operating Instructions Manual

Also see for PT-VW360: Operating instructions Operating instructions

Contents

[PICTURE] menuOn the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 52) for the operation of the menu screen.[PICTURE MODE]You can switch to the desired picture mode suitable for the image source and the environment in which theprojector is used.1) Press as to select [PICTURE MODE].2) Press qw or the button.f The [PICTURE MODE] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[STANDARD] The picture becomes suitable for moving images in general.[DYNAMIC] The light output is maximized for use in bright areas.[BLACKBOARD] The picture becomes suitable for projecting on a black board.[WHITE BOARD] The picture becomes suitable for projecting on a white board.[CINEMA]*1 The picture becomes suitable for movie sources.[NATURAL]*2 The picture becomes suitable for use in low-light areas.*1 Only for the movie-based signals.*2 Only for the still image signals.[CONTRAST]You can adjust the contrast of the colors.1) Press as to select [CONTRAST].2) Press qw or the button.f The [CONTRAST] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Adjustment rangePress the w button. Brightens the screen and makes the color of image deeper. -32 ~ +32Press the q button. Darkens the screen and makes the color of image lighter.Attentionf Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].[BRIGHTNESS]You can adjust the dark (black) part of the projected image.1) Press as to select [BRIGHTNESS].2) Press qw or the button.f The [BRIGHTNESS] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Adjustment rangePress the w button. Increases the brightness of the dark (black) parts of the screen. -32 ~ +32Press the q button. Reduces the brightness of the dark (black) parts of the screen.[COLOR](Only for movie-based signal input)You can adjust the color saturation of the projected image.1) Press as to select [COLOR].56 - ENGLISHChapter 4 Settings - [PICTURE] menu