[DISPLAY OPTION] menuOn the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 52) for the operation of the menu screen.[ON-SCREEN DISPLAY]Set the on-screen display.[INPUT GUIDE]Set the input guide to be displayed when switching the input. The input guide screen shows the currently selectedinput and input signal names.1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [INPUT GUIDE].4) Press qw to switch the item.f The items will switch each time you press the button.[DETAILED] Displays the name of input terminal and input signal graphically.[OFF] Disables the input guide.[SIMPLE] Displays the name of input terminal and input signal.[OSD POSITION]Set the position of the menu screen (OSD).1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [OSD POSITION].4) Press qw to switch the item.f The items will switch each time you press the button as following:[CENTER] → [UPPER LEFT] → [UPPER RIGHT] → [LOWER LEFT] → [LOWER RIGHT] → [CENTER] →...[WARNING MESSAGE]Set the display/hide of the warning message.1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [WARNING MESSAGE].4) Press qw to switch the item.f The items will switch each time you press the button.[ON] Displays the warning message.[OFF] Hides the warning message.Notef When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning statussuch as “TEMPERATURE WARNING” is detected. The prompting message for filter replacement or lamp unit replacement will not bedisplayed either.68 - ENGLISHChapter 4 Settings - [DISPLAY OPTION] menu