Notef Closed caption is a function that displays text information of video signals mainly used in North America. Captions may not be displayeddepending on the connected devices or contents being played back.f [CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YCBCR signal is input.f If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devices or the usedcontent of the closed caption corresponding connection.f If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXT DISPLAY](x page 82) is set to [ON].f Closed captions are not displayed when the menu screen is displayed.[SCREEN SETTING]Set the screen size.When changing the aspect ratio of a projected image, correct to the optimum image position for the set screen.Set as necessary for the screen in use.1) Press as to select [SCREEN SETTING].2) Press the button.f The [SCREEN SETTING] screen is displayed.3) Press as to select [SCREEN FORMAT].4) Press qw to switch the [SCREEN FORMAT] item.f The items will switch each time you press the button.Model No. [SCREEN FORMAT] The available items to set when [SCREEN POSITION] isselectedPT-VW360[16:10] Cannot be set.[16:9] Three items of [CENTER], [HIGH] and [LOW] can be selected forvertical position.[4:3] Three items of [CENTER], [LEFT] and [RIGHT] can be selectedfor horizontal position.PT-VX430[4:3] Cannot be set.[16:9] Three items of [CENTER], [HIGH] and [LOW] can be selected forvertical position.[16:10]5) Press as to select [SCREEN POSITION].f In the following cases, the [SCREEN POSITION] cannot be set.g For PT-VW360, if [SCREEN FORMAT] is set to [16:10].g For PT-VX430, if [SCREEN FORMAT] is set to [4:3].6) Press qw to adjust the [SCREEN POSITION].f The items will switch each time you press the button.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.[OFF] Disables the startup logo display.Notef The startup logo will disappear in approximately 30 seconds.f To create/register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Panasonic website(https://panasonic.net/cns/projector/).70 - ENGLISHChapter 4 Settings - [DISPLAY OPTION] menu