f For some items, press qw to display an individual adjustment screen with a bar scale as shown below.Notef Pressing the f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted orused are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAME LOCK] may not be displayeddepending on the input signal.f Some items can be adjusted even if signals are not input.f Individual adjustment screen is cleared automatically if no operation is performed for approximately 5 seconds.f For menu items, refer to “Main menu” (x page 53) and “Sub-menu” (x page 54).Resetting adjustment values to the factory defaultIf the button on the remote control is pressed, the values adjusted in the menu items are restored tothe factory default settings.button1) Press the button on the remote control.Notef You cannot reset all the settings to the factory default at a time.f To reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute the [PROJECTOR SETUP] menu →[INITIALIZE ALL] (x page 81).f Some items cannot be reset by pressing the button. Adjust each item manually.Main menuThe main menu consists of the following 7 menu items.When a main menu item is selected, the cursor moves to its sub menu.Main-menu item Page[PICTURE] 56[POSITION] 61[LANGUAGE] 67[DISPLAY OPTION] 68[PROJECTOR SETUP] 74[SECURITY] 82[NETWORK/USB] 85ENGLISH - 53Chapter 4 Settings - Menu navigation
