2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the text display.[ON] Enables the text display.[TEXT CHANGE]Register or change the displayed text when [TEXT DISPLAY] is set to [ON].1) Press as to select [TEXT CHANGE].2) Press the button.f The [TEXT CHANGE] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.4) Press asqw to select [OK], and press the button.f The text is changed.[MENU LOCK]Display the menu by the 1) Press as to select [MENU LOCK].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Enables menu operations.[ON] Disables menu operations.Notef When the entered password is incorrect after setting [MENU LOCK] to [ON], the f The factory default setting or the setting after executing the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is set to [OFF]. Set it to [ON]if necessary.f When [MENU LOCK] is set to [ON], the [MENU LOCK PASSWORD] screen is displayed after pressing the the set menu lock password, the menu operation is enabled. In this case, the menu operation will remain enabled until the projector entersinto standby mode.[MENU LOCK PASSWORD]Change the menu lock password.1) Press as to select [MENU LOCK PASSWORD].2) Press the button.f The [MENU LOCK PASSWORD] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.f Up to 16 characters can be input.4) Press asqw to select [OK], and press the button.f To cancel, select [CANCEL].Attentionf The initial password is “AAAA” at the time of purchase or when the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is executed.f Change the password periodically that is hard to guess.[CONTROL DEVICE SETUP]Enable/disable the button operations on the control panel and the remote control.1) Press as to select [CONTROL DEVICE SETUP].ENGLISH - 83Chapter 4 Settings - [SECURITY] menu