[SECURITY] menuOn the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 52) for the operation of the menu screen.f When the projector is used for the first timeInitial password: Press awsqawsq in order, and press the button.Attentionf When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password andthen continue operations of the [SECURITY] menu.f When the password has been changed previously, enter the changed password, and press the button.Notef The entered password is displayed with "" mark on the screen.f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.[PASSWORD]The [PASSWORD] screen is displayed when the power is turned on, [INITIALIZE ALL] is executed or [INITIALIZE]in the [NETWORK/USB] menu is executed. When the entered password is incorrect, the operation will berestricted to the power standby <v/b> button on the control panel or on the remote control.1) Press as to select [PASSWORD].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the security password entry.[ON] Enables the security password entry.Notef The [PASSWORD] setting is set to [OFF] by the factory default.f The security password input when turning on the power is not enabled until turning off the power supply and plugging the power plug intothe outlet after setting it to [ON]. If the entered password is incorrect when the power is turned on, the operation will be restricted to thepower <v/b> button.[PASSWORD CHANGE]Change the security password.1) Press as to select [PASSWORD CHANGE].2) Press the button.f The [PASSWORD CHANGE] screen is displayed.3) Press asqw or number buttons (<1> - <6>) to set the password.f Up to eight button operations can be set.4) Press the button.5) Re-enter the password for the confirmation.6) Press the button.Notef The entered password is displayed with "" mark on the screen.f Change the password periodically and make it hard to guess.f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.f If numbers have been used for the security password, the security password will need to be initialized again if the remote control is lost.Consult your dealer for the initialization method.[TEXT DISPLAY]Overlap the security message (text) over the projecting image.1) Press as to select [TEXT DISPLAY].82 - ENGLISHChapter 4 Settings - [SECURITY] menu