Panasonic PT-VW360 Operating Instructions Manual

Also see for PT-VW360: Operating instructions Operating instructions

Contents

StorageWhen storing the projector, keep it in a dry room.DisposalTo dispose of the product, ask your local authorities or dealer for correct methods of disposal.The luminous lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealerfor correct methods of disposal.Cautions on userTo get a good picture qualityIn order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blindsover windows and turn off any lights near the screen to prevent outside light or light from indoor lamp from shiningonto the screen.rDo not touch the surface of the projector lens with your bare hands.If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified andprojected onto the screen.It is recommended to attach the supplied lens cap to the projection lens when you do not use the projector.rLCD panelThe LCD panel is precision-made. Note that in rare cases, pixels of high precision could be missing or alwayslit. Note that such phenomena do not indicate malfunction. If still images are projected for a long time, a residualimage may remain on the LCD panel. Note that the residual image may not disappear.rOptical partsWhen the operating environment temperature is high or in environments where lots of dust, cigarette smoke, etc.is present, the replacement cycle of the LCD panel, polarizing plate and other optical parts may be shorter even ifused for less than one year. Consult your dealer for details.rLuminous lampThe light source of the projector is a mercury lamp with high internal pressure.A high-pressure mercury lamp has the following characteristics.f The luminance of the luminous lamp will decrease by duration of usage.f The luminous lamp may burst with a loud sound or have its service life shortened because of shock, chipping, ordegradation due to cumulative runtime.f The life of the luminous lamp varies greatly depending on individual specificities and usage conditions. Inparticular, continuous use over 12 hours and frequent switching off/on of the power greatly deteriorate theluminous lamp and affect the luminous lamp life.f In rare cases, the luminous lamp burst shortly after the projection.f The risk of bursting increases when the luminous lamp is used beyond its replacement cycle. Make sure toreplace the lamp unit consistently. (“When to replace the lamp unit” (x page 118), "Replacing the lamp unit"(x page 118))f If the luminous lamp bursts, gas contained inside of the luminous lamp is released in a form of smoke.f It is recommended to store replacement lamp for contingency.rComputer and external device connectionsWhen connecting a computer or an external device, read this manual carefully regarding the use of power cordsand shielded cables as well.20 - ENGLISHChapter 1 Preparation - Precautions for use