Panasonic PT-VW360 Operating Instructions Manual

Also see for PT-VW360: Operating instructions Operating instructions

Contents

Network connectionThis projector has network function that allows the following by connecting a computer.f Web controlBy accessing to the projector from a computer, you can perform setting, adjustment, status display, etc. of theprojector. Refer to “Web control function” (x page 99) for details.f Multi Monitoring & Control software“Multi Monitoring & Control Software”, a software application to monitor and control multiple display devices(projector or flat panel display) connected to intranet, can be used.Plug-in software “Early Warning Software”, which monitors the status of the display devices and their peripheralswithin an intranet, and notifies of abnormality of such equipment and detects the signs of possible abnormality,can also be used.For details, visit the Panasonic website (https://panasonic.net/cns/projector/).f Image transfer application softwareUsing the Panasonic image transfer application software, the image sent from a device can be displayed as aprojected image.For details on how to use the still image transfer application software “Presenter Light” compatible with Windowscomputers, please refer to the Operating Instructions of “Presenter Light Software”. “Presenter Light Software”can be downloaded by accessing the projector via a web browser. For details, please refer to “About PresenterLight” (x page 97). The applicaton software and its operating instructions can be downloaded from ourwebsite (https://panasonic.net/cns/projector/).For details of the image transfer application software “Wireless Projector” compatible with the iPad/iPhone/iPodtouch or Android device, refer to the Panasonic website (https://panasonic.net/cns/projector/).f PJLinkBy using PJLink protocol, you can send inquiries about the operations or status of the projector from acomputer. Refer to “PJLink protocol” (x page 122) for details.f Command controlOperation or status query of the projector can be performed from a computer with the control commands. Referto “Control commands via LAN” (x page 123) for details.Connecting with wired LANConnection exampleComputerLAN cable (straight)ProjectorLAN cable (straight)HubAttentionf When a LAN cable is directly connected to the projector, the network connection must be made indoors.Notef A LAN cable is required to use the wired LAN function.f Use a LAN cable that is straight cable or cross cable and compatible with CAT5 or higher. When you need to know whether to use one orboth straight/cross cable depending on the configuration of the system, please confirm with your network administrator. For this projector, itwill identify the type of cable (straight/cross) automatically.f Use a LAN cable of 100 m (328'1") or shorter.94 - ENGLISHChapter 5 Operation of Function - Network connection