Projector settings1) Use the LAN cable to connect the projector with computer.2) Turn on the projector.3) Select the [NETWORK/USB] menu → [WIRED LAN] from the main menu and press the button.4) Set the detailed setup of [WIRED LAN].f For details,please refer to “WIRED LAN” (x page 85).Notef Please confirm with your network administrator before you connect to an existing network.f The following settings are set before the projector leaves the factory.[DHCP] OFF[IP ADDRESS] 192.168.10.100[SUBNET MASK] 255.255.255.0[DEFAULT GATEWAY] 192.168.10.1[DNS1]/[DNS2] NONEComputer settings1) Turn on the computer.2) Make the network setting according to your system administrator.f If the projector settings are the default settings, the computer can be used with the following networksettings.[IP ADDRESS] 192.168.10.101[SUBNET MASK] 255.255.255.0[DEFAULT GATEWAY] 192.168.10.1Connecting with wireless LANThe wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the net-work function through the wireless LAN.Connection exampleIEEE802.11b/g/nWireless module of optional accessories(Model No.: ET-WML100)Preparation and confirmation of the projector1) Turn on the projector.2) Attach the wireless module (Model No.: ET-WML100) of optional accessories firmly into the (VIEWER/WIRELESS)> terminal.Wireless module of optional accessories(Model No.: ET-WML100)ENGLISH - 95Chapter 5 Operation of Function - Network connection
