2) Press qw or the button.f The [COLOR] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Adjustment rangePress the w button. Deepens colors. -32 ~ +32Press the q button. Weakens colors.[TINT](Only for movie-based signal input except PAL / PAL-M / PAL-N / PAL60 / SECAM)You can adjust the skin tone in the projected image.1) Press as to select [TINT].2) Press qw or the button.f The [TINT] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Adjustment rangePress the w button. Adjusts skin tone toward greenish color. -32 ~ +32Press the q button. Adjusts skin tone toward reddish purple.[SHARPNESS]You can adjust the sharpness of the projected image.1) Press as to select [SHARPNESS].2) Press qw or the button.f The [SHARPNESS] individual adjustment screen is displayed.3) Press qw to adjust the level.Operation Adjustment Adjustment rangePress the w button. Contours become sharper. 0 ~ +15Press the q button. Contours become softer.Notef [SHARPNESS] will be invalid when [DAYLIGHT VIEW] is set to [AUTO] or [ON].[COLOR TEMPERATURE]You can switch the color temperature if the white areas of the projected image are bluish or reddish.1) Press as to select [COLOR TEMPERATURE].2) Press qw or the button.f The [COLOR TEMPERATURE] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Factory default setting.[HIGH] Becomes a bluish image. Select this when the white areas of the projected image are reddish.[LOW] Becomes a reddish image. Select this when the white areas of the projected image are bluish.[IRIS]Aperture correction and signal compensation are performed automatically based on the image to result in animage of optimum contrast.1) Press as to select [IRIS].ENGLISH - 57Chapter 4 Settings - [PICTURE] menu