Operation3-693160-A2-GB22-10 December 1996Deactivating the Alarm RelayThe Alarm Cut-off command forces a deactivation ofthe alarm relay on the 3000 Series Carrier during an alarmcondition. Since this function only affects the 3000 SeriesCarrier, it is only available for Model 3161 DSU/CSUs.The alarm relay function must first be enabled by theAlarm Relay configuration option (see Appendix C,Configuration Options).To deactivate the alarm relay,1. Press the key from the top-level menu screento bring the Ctrl branch onto the front panel LCD.F1DS U E SFStat Test CnfigF2 F32. Press F3 to select Ctrl from the top-level menuscreen.F1DS U E SFTest Cnfig CtrlF2 F33. From the Control screen, press F1 to select ACO.F1Control:ACO Rel LEDF2 F34. The Command Complete screen appears.F1Alarm Cut-Off:Command CompleteF2 F3Starting Front PanelEmulationThe front panel emulation function enables you todisplay the front panel of a specified near-end or far-end316x DSU/CSU on a PC. If the DSU/CSU selected is notlocally attached to the PC, you must first dial to theremote DSU/CSU before starting front panel emulation.To start front panel emulation,1. From the PC, open Program Manager fromWindows.2. The Front Panel window opens.NOTEThe modem attached to the PCmust support AT commands forthe Front Panel Emulationsoftware to successfully place thecall.
