Paradyne ACCULINK 316x Operator's Manual

Also see for 3165: Quick installation Release note Operator's guide Operator's guide Quick reference

Contents

Paradyne ACCULINK 316x Operator's Manual Manual pdf 31 page image

ACCULINK 316x DSU/CSU2-8 December 1996 3160-A2-GB22-10Installing the Redundant –48 Vdc PowerSupplyTo install the 3160/3164 DSU/CSU using a redundant– 48 Vdc power supply, refer to Figure 2-9 and use thefollowing procedure.To install the redundant –48 Vdc power supply,1. Connect the black wire to the –48 Vdc returnsource B.2. Connect the red wire to the –48 Vdc returnsource A.3. Connect the green wire to a suitable earth ground.4. Connect the orange wire to the –48 Vdc inputsource B.5. Connect the blue wire to the –48 Vdc inputsource A.6. Cut the white wire off at the outer insulation.7. Plug the power connector into the 3160/3164DSU/CSU.Figure 2-9. –48 Vdc Redundant Source Power Supply Pinouts