Operation3-193160-A2-GB22-10 December 19964. From the Edit screen, select the functional groupyou want to edit by pressing the appropriatefunction key. Use the scroll keys, if necessary.F1Edit:DTE Port NETF2 F3The configuration options for the selectedfunctional group appear on the front panel oneoption at a time. The option name appears on Line1 with the current value next to it. To reach otheroptions, use the Next and Previous selections toscroll forward and backward through the group ofoptions.F1NET Framing : E SFNext D4 ESFF2 F35. Press the appropriate Function key to chooseanother value. Use the scroll keys, if necessary.6. Use the Save procedure to save your changes tothe Active or Customer area.Differences Using the Async Terminal: Whendisplaying/editing a configuration option set from theasync terminal, select Configuration from the mainmenu. The main/configuration screen appears with theLoad From field in the display area as shown inFigure 3-16.Customer ID: New Custmain/configurationModel: ACCULINK XXXXLoad From: ______Load Main Previous Cntrl–x to DisconnectFigure 3-16. Load From ScreenPopulate this field with a valid configuration option setvalue and select Load at the bottom of the screen. Theconfiguration option set is loaded and the main/configuration/load screen appears with the Save To fieldas shown in Figure 3-17.Customer ID: New Custmain/configuration/loadModel: ACCULINK XXXXLoad From: ______Edit Save Main Previous Cntrl–x to DisconnectSave To: ______CustFigure 3-17. Save To Screen
