Operation3-213160-A2-GB22-10 December 1996To protect you from accidentally exiting an edit sessionbefore saving your changes, the system prompts SaveOptions? if you select either Main or Cntrl-x from anedit screen (see Figure 3-18). If you respond No, thesystem exits without saving the changes. If you respondYes, you are prompted to specify where the changesshould be saved.Customer ID: New Custmain/control/miscellaneousModel: ACCULINK XXXXSave Main Previous Cntrl–x to DisconnectMiscellaneous Control OptionsCustomer Identification Name/Number: _____Password: _____Change Password: _____Re–enter Password: _____YesFigure 3-18. Save Edit screenNOTEIf you terminate async terminalcontrol by changing theconfiguration interface options,the async terminal must bereconfigured on the port.Selecting/Copying to a Specific PortYou have the capability of selecting a specific port toconfigure and to copy the configuration options for oneport to another port or to all ports. You can use theconfiguration worksheets provided to note theconfiguration options you have chosen (see Figure 3-19).Selecting a Specific PortTo select a specific port to configure,1. Press F3 to select Cnfig from the top-level menuscreen.F1DS U E SFStat Test CnfigF2 F32. Select the configuration option set to be copiedinto the Edit area by using the appropriatefunction key. Use the scroll keys, if necessary.F1Load from:Activ Cust Fact1F2 F33. Press F1 to select Edit.F1Choose Funct:Edit SaveF2 F34. Press F2 to select Port.F1Edit:DTE Port NETF2 F35. From the Port Select screen, press the Functionkey that corresponds to the desired port. Use thekey to scroll addition ports onto the screen, ifnecessary.F1Port S elect:Copy Prt1 Prt2F2 F3
