Operation3-413160-A2-GB22-10 December 19967. From the Display Chan screen, press F1 (NET) todisplay the channels allocated to the Network T1interface.F1Display Chan:NET DTEF2 F3NOTEIf the DSX-1 Drop/Insert T1Network interface is disabled, theNetwork T1 interface channelsare displayed immediately. TheDisplay Chan screen does notappear.Or, press F2 (DTE) to display the channelsallocated to the DSX-1 Drop/Insert T1 interface.F1Display Chan:NET DTEF2 F38. If you pressed F1 (NET) the channels allocated tothe Network T1 interface are displayed. Line 1displays the 24 channels for the Network T1interface, while Line 2 displays what is allocatedto the DS0 channel shown in Line 1. Pressing theor key scrolls the channels onto the screenin groups of three.F1N1 N2 N3D2 D3 Prt1F2 F3If you pressed F2 (DTE), the channels allocated tothe DSX-1 Drop/Insert T1 interface are displayed.Line 1 displays the 24 channels for the DSX-1Drop/Insert T1 interface, while Line 2 displayswhat is allocated to the DS0 channel shown inLine 1.F1D1 D2 D3– N1 N2F2 F3Differences Using the Async Terminal: To display DS0channel assignments, select Display Channels from themain/configuration/edit/channel menu. Figure 3-29 showsan example of the screen that appears. The screen displaysboth the Network T1 and the DSX-1 Drop/Insert interfacechannel assignments.Customer ID: New Custmain/configuration/edit/channel/displayModel: ACCULINK XXXXMain Previous Cntrl–x to DisconnectNETN1: Prt1N2: Prt1N3: Prt1N4: D4N5: D5N6: D6N7: D7N8: D8N9: D9N10: D10N11: D11N12: D12N13: D13N14: D14N15: D15N16: D16N17: –N18: D18N19: D19N20: D20N21: D21N22: Prt3N23: Prt3N24: Prt3DTED1: N17D2: Prt2D3: Prt2D4: N4D5: N5D6: N6D7: N7D8: N8D9: N9D10: N10D11: N11D12: N12D13: N13D14: N14D15: N15D16: N16D17: –D18: N18D19: N19D20: N20D21: N21D22: Prt4D23: Prt4D24: Prt4Figure 3-29. Display Channels Screen
