Installation2-133160-A2-GB22-10 December 1996To set a password,1. Press the key on the top-level menu screen tobring the Ctrl branch onto the front panel LCD.F1DS U E SFStat Test CnfigF2 F32. Press F3 to select Ctrl from the top-level menuscreen.F1DS U E SFTest Cnfig CtrlF2 F33. Press the key on the Ctrl screen until thePasswd selection appears on the front panel LCD.F1Control:Call Rel LEDF2 F34. Press F3 to select Passwd.F1Control:Reset CID P asswdF2 F35. Use the and keys to position the cursorunder the desired character. You must enter acharacter before the moves the cursor to thenext space to the right. The key is notdestructive.F1Passwd: _Up Down SaveF2 F36. Enter the desired password. Press F1 (Up) andF2 (Down) to scroll up and down through thevalid characters/numbers for the password. Validpassword characters are 0–9, a–z, A–Z, #, –, .,and /.F1Passwd: xxxxxxxxUp Down SaveF2 F37. Press F3 (Save) to save the password.F1Passwd: xxxxxxxxUp Down SaveF2 F3Differences Using the Async Terminal: To set thepassword, select miscellaneous/control/options in themain/control screen. This screen displays the promptChange Password? If you enter yes, the screen displaysthe Password and Re-enter Password fields as shown inFigure 2-12.Customer ID: New Custmain/control/miscellaneousModel: ACCULINK XXXXSave Main Previous Cntrl–x to DisconnectMiscellaneous Control OptionsFront Panel LED Display:_____Customer Identification Name/Number:_____Password:_____Re-enter Password:_____Change Password?_____YesFigure 2-12. Password Configuration Screen
