ACCULINK 316x DSU/CSU3-40 December 1996 3160-A2-GB22-10Displaying DS0 Channel AssignmentsUse the Display command for channel configuration toview how the DS0 channels for either the DSX-1Drop/Insert T1 interface or the Network interface arecurrently allocated. The display appears on the front panelLCD.Line 1 of the display shows the 24 channels of theselected interface. Pressing or scrolls the nextthree channels onto the LCD. Line 2 displays what isallocated to the DS0 channel listed in Line 1. Symbolsused in the display are shown in Table 3-8.Table 3-8Display Channel SymbolsSymbol Meaning– DS0 channel is notallocatedPrtn DS0 channel is allocated toPortn, wheren is 1, 2, 3,or 4.Nn DS0 channel is allocated toNetwork T1 interface DS0channeln wheren can beany number from 1 through24.Dn DS0 channel is allocated toDSX-1 Drop/Insert T1interface DS0 channelnwheren can be anynumber from 1 through 24.To display the DS0 channel allocation,1. Press F3 to select Cnfig from the top-level menuscreen.F1 F2 F3DS U E SFStat Test Cnfig2. Select the configuration option set to be copiedinto the Edit area by using the appropriatefunction key. Use the scroll keys, if necessary.F1Load from:Activ Cust Fact1F2 F33. Press F1 to select Edit.F1Choose Funct:Edit SaveF2 F34. Press the key from the Edit screen to displaythe Chan selection.F1Edit:DTE Port NETF2 F35. Press F3 to select Chan.F1Edit:Port NET ChanF2 F36. From the Channel Config screen, press F1 toselect Dsply (display).F1Channel Config:Dsply Clear DTEF2 F3
