Paradyne ACCULINK 316x Operator's Manual

Also see for 3165: Quick installation Release note Operator's guide Operator's guide Quick reference

Contents

Paradyne ACCULINK 316x Operator's Manual Manual pdf 30 page image

Installation2-73160-A2-GB22-10 December 1996Installing the Single –48 Vdc Power SupplyTo install the 3160/3164 DSU/CSU using a singlesource – 48 Vdc power supply, refer to Figure 2-8 and usethe following procedure.To install the – 48 Vdc single source power supply,1. Connect the black and red wires to the – 48 Vdcreturn source.2. Connect the green wire to a suitable earth ground.3. Connect the orange and blue wires to the –48 Vdcinput source.4. Cut the white wire off at the outer insulation.5. Plug the power connector into the 3160/3164DSU/CSU.Figure 2-8. –48 Vdc Single Source Power Supply Pinouts