ACCULINK 316x DSU/CSU3-12 December 1996 3160-A2-GB22-10Customer ID: New Custmain/status/ledsModel: ACCULINK XXXXLEDsTestNET T1SigOOFAlrmEERDTE T1SigOOFAlrmPDVBPVPort1DTRTXDRXDCTSRTSRefresh Main Previous Cntrl–x to DisconnectPort2DTRTXDRXDCTSRTSPort3DTRTXDRXDCTSRTSPort4DTRTXDRXDCTSRTSFigure 3-7. LED Status ScreenThe LEDs are sampled every 5 seconds from selectiontime. Use Refresh to update the screen.Selecting the DSX-1 or a Port for LED DisplayUse the LED command on the Control branch to selectwhich port’s (DSX-1 Drop/Insert or data port) statusappears on the five shared LEDs on the front panel.To select a port for LED display,1. From the top level menu screen, press once toscroll the Ctrl name onto the screen.F1DS U E SFStat Test CnfigF2 F32. Press F3 to select Ctrl.F1DS U E SFTest Cnfig CtrlF2 F33. From the Ctrl screen, press F3 to select LED.F1Control:Call Rel LEDF2 F3The currently selected port name appears on thetop line of the LCD.F1LED Dsply: DTEDTE Prt1 Prt2F2 F34. From the LED Dsply screen, press the functionkey that corresponds to the DSX-1 or port forwhich you want the LEDs to display. Use thescroll keys, if necessary.Select DTE to monitor the DSX-1’s SIG, OOF,ALRM, PDV, and BPV status signals on theshared LEDs.Select a particular port to monitor the port’s DTR,TXD, RXD, CTS, and RTS control signals on theshared LEDs.Differences Using the Async Terminal: Select FrontPanel LED Display in the main/control/miscellaneousscreen to select a port for LED display.
