ACCULINK 316x DSU/CSU4-14 December 1996 3160-A2-GB22-10Aborting Test PatternsUse the Abort command to stop all test patterns or anyselected test pattern active on the DSU/CSU.To abort test patterns,1. Press F2 to select Test from the top-level menuscreen.F1DS U E SFStat Test CnfigF2 F32. From the Test screen, press F3 to select Ptrns.F1Test:Rlpbk Lpbk PtrnsF2 F33. From the Patterns screen, press F1 to select Abort.F1Patterns:Abort Send MonF2 F34. From the Patterns Abort screen, press the desiredfunction key to abort either All active test patterns,active Send test patterns, or the active Monitor(Mon) test pattern.F1Patterns: A bortAll Send MonF2 F3If you select All, the DSU/CSU terminates allactive test patterns and displays the messageCommand Complete. Skip Step 5.NOTEBe careful when selecting a specifictest pattern to abort. If you mistakenlychoose to abort a test pattern that isnot currently running, a CommandComplete message still displays andthe test pattern currently active stillruns. You can use the TStat branch ofthe menu to view the test status todetermine if the abort was successful.5. From the Abort screen, press the function key thatcorresponds to the network or port for which youwant to abort a test pattern. Use the scroll keys, ifnecessary.F1Abort:Send or MonNET Prt1 Prt2F2 F3The DSU/CSU terminates the selected test patternand displays the message Command Complete.Lamp TestUse the Lamp Test commands to start and stop a test ofthe DSU/CSU front panel LEDs. This feature is onlyavailable from the front panel.Starting a Lamp TestTo start a Lamp test,1. Press F2 to select Test from the top-level menuscreen.F1DS U E SFStat Test CnfigF2 F3
